Hello, Having a router problem. My Second Westell 7500 when I plug my eathernet cable directly into it says my connection cable is broken and when I look behind the PC the light for the eathernet is not on how ever if I plug it into my Netgear switch it works fine. What could be the issue? I have tried resetting the router to its defaults and I can't access it. I am currently using my switch connected to my first westel 7500 and it works fine but the second westel is no longer allowing me to even connect to it and keeps my network light off. I need to set the second westel as a switch / hub

I just migrated a Business customer from TWC to DSL. They were paying too much money for what they were using, I suggested Fairpoint for prices and they were cheaper in the long run. I wanted to pass along my experince with Fairpoint. Tech installed the DSL line, it was a 4port sr100 modem, in nat/firewall mode. I called to have modem put in bridge mode, someone from the local office called me back and gave me the steps. The customer is on 5x1 connection, getting 5 and 1 at all times. I have PfSense in the mix emailing me when things go wrong. All in all a good experince. Would they like faster...yes Do they NEED faster, honestly no.

I have had my comtrend ar-5381u wireless ADSL2+ router for a while now and yesterday the light under "power" has gone red and no other lights will come on. I have no internet access whatsoever wired or wireless. If there is a way for me to fix this without having to send it in, please let me know.

There is an internet outage causing DSL to lose authentication, and causing FAST Internet to be very very VERY slow. my 15/15 connection is getting 760kbps average up and down.

i forgot what it was i know the user name is root but forgot the password i tried 12345 but that does not work does any one know?

Netflix performance in the evenings via my FairPoint FAST 30/15 Mbps fiber connection has gotten really bad lately - some evenings my Roku can't even sustain a 1.6 Mbps connection. All tracerts through cogent.com show high latency. Is it time to switch to Comcast?

Hi all, I've recently picked up FairPoint DSL. I'm at a fair distance from the CO (~3.5 miles) and have only recently qualified for service after years of waiting. I was told that I was only able to get 768/128 service here and that's effectively what I'm showing on the modem (Modem shows 911/150 to be exact). What I've noticed is that my attainable rate seems to be very consistently in the low two thousands down and between 450/500 up. It's my (somewhat vague) understanding that with other carriers, Verizon for instance, they run an 'optimizer' that will move the service speed up to the functional limit on the specific circuit. Is that the case with FairPoint? And if not,is it likely that I'd get any traction if I called them and said that I was showing a higher attainable speed so could we take a shot at 1.5/256? And don't get me wrong, I'm happier with the current service than with no service at all but I'd very much like to squeak a bit more speed out of it ;') Thanks very much for any thoughts, Dan

For the past 3 weeks now every single night starting at 6PM EST my pings become absolutely atrocious when getting peered through both Cogent and Above.net. This is absolutely unacceptable for the price I am paying. I basically can't do anything after 6PM, which is the time when I am most active on the internet for gaming. I can't even stream internet radio which only uses like 5kb of bandwidth. Gaming is impossible since with the lag I am rubber banding like crazy or actions in the game take forever to respond. It's taken me forever just to get to this forum to post this. This has been my usual tracert for every single night these past few weeks happening on both Cogent and Above.net: Tracing route to dslreports.com [64.91.255.98] over a maximum of 30 hops: 4 273 ms 287 ms 271 ms pool-64-222-213-132.port.east.myfairpoint.net [64.222.213.132] 5 202 ms 298 ms 341 ms pool-64-222-213-129.port.east.myfairpoint.net [64.222.213.129] 6 452 ms 489 ms 477 ms te0-0-0-1.ccr11.alb02.atlas.cogentco.com [38.104.52.33] 7 427 ms 357 ms 307 ms te0-6-0-7.ccr21.alb02.atlas.cogentco.com [66.28.4.21] 8 323 ms 326 ms 318 ms be2106.ccr21.jfk02.atlas.cogentco.com [154.54.3.49] 9 267 ms * 283 ms be2114.ccr21.ord01.atlas.cogentco.com [66.28.4.202] 10 290 ms 296 ms 301 ms be2005.ccr21.ord03.atlas.cogentco.com [66.28.4.74] 11 * 317 ms * te2-1.mag01.ord03.atlas.cogentco.com [154.54.40.174] 12 271 ms 261 ms 298 ms te0-0-2-0.rcr11.b002281-5.ord03.atlas.cogentco.com [154.54.25.2] 13 278 ms 292 ms 262 ms cogent-chi.liquidweb.com [38.104.103.166] 14 216 ms 205 ms 196 ms lw-border1.rtr.liquidweb.com [209.59.157.1] 15 238 ms 267 ms 228 ms lw-core4-te91.rtr.liquidweb.com [209.59.157.206] 16 288 ms 274 ms 304 ms lw-dc3-dist15.rtr.liquidweb.com [69.167.128.201] 17 299 ms 320 ms 270 ms www.dslreports.com [64.91.255.98]

I've had Fairpoint for around 2 years now, and been using it on this gaming computer for almost a year. It has worked fine, with outages only during storms or maintenance. All the sudden, it started disconnecting intermittently. At first it was just disconnecting and then coming back on a couple minutes later. This morning I was playing a game and would randomly spike up to 1000ms for a split second every minute or so. After I disconnect just now I ran a pingplot and these were the results. I asked someone else in the house if they had any problem, they are connect wirelessly and I am wired. They said they didn't notice any service interruptions. Could this be my computer, the cable, or something odd with Fairpoint itself?

Hello - I'm just wondering if anyone knows what is involved in changing one's landline phone number as a Fairpoint customer, and the cost. I did call Fairpoint (tech support) today, but was informed that the department that could help with this is closed on the weekends. I hope to have an answer before Monday. Thank you.

There are three tiers now 30Mbps+ 15Mbps 4Mbps Does anyone know the upload speed of these new tiers? I plan on acquiring another broadband connection. Thanks.

Folks, Running a Comtrend AR-5381U router from Fairpoint. On this router, the external/remote administration interface is always enabled. The first Fairpoint service rep indicated this wasn't appropriate, but kicked it up a level. That next rep said it was to allow Fairpoint in to service the router (this was a voice-mail message; I did not have opportunity to discuss this). Seems like a poor idea to me. My previous router explicitly states "With Remote Administration enabled, your network will be at risk from outside attacks." If anyone knows how to disable remote administration on this unit, the instructions would be appreciated. Another comtrend AR-5381U (white case), had remote administration disabled by default. My AR-5381U (black case) has no mechanism to disable remote administration as far as either I or the Fairpoint service rep could tell. The service rep indicated a distinction between black case and white case units. Maybe someone here has further insight into this? The upper-level Fairpoint service rep offered to swap for a router with no wireless capability (seems like a downgrade). Thank you.

Hello, I have the 3 Mb plan which has been working fine for the past year (before that the line was on the 768k plan for about 8 years). For the last month or so the speed has slowed down quite a bit. A modem power cycle always brings back the 3mb speed, but it will eventually slow down again. Yesterday I noticed a ton of static on the land line...after which the dsl speed dropped. I replaced the filter for that phone and it seemed to fix the static issue and subsequent phone calls didn't slow down the dsl speed. I was hoping that would fix my issue...however I woke up this morning to a slower speed again. Could y'all check my stats and let me know what I should try next (ie should I now replace the filter on the answering machine and dvr phone line?)? Stats with slower speed: (This slower speed is mild compared to the sub 1000 I was getting before I replaced the phone's dsl filter) Transceiver Statistics Transceiver Revision: 7.2.3.0 Vendor ID Code: 4 Line Mode: G.DMT Mode Data Path: Interleaved Transceiver Information Downstream Path Upstream Path DSL Speed (Kbits/Sec) 2752 768 Margin (dB) 14.0 10.0 Line Attenuation (dB) 42.0 27.0 Transmit Power (dBm) 19.0 11.8 Stats after modem reset: Transceiver Statistics Transceiver Revision: 7.2.3.0 Vendor ID Code: 4 Line Mode: G.DMT Mode Data Path: Interleaved Transceiver Information Downstream Path Upstream Path DSL Speed (Kbits/Sec) 3360 864 Margin (dB) 16.0 14.0 Line Attenuation (dB) 41.5 27.0 Transmit Power (dBm) 6.7 11.9

can i replace my westell 7500 modem with one that will accept 802.11n?

For the usual FairPoint and routing silliness to appear. I am using the 30/15 FAST (fiber optics) package. Past 3 weeks now every single night from 5PM to 8AM this is the occurance. Download/upload speeds drop to about 250kb/s download and anywhere from 10-50kb/s upload. This is a usual tracert, one of the better ones. Usually pings from hops 3 and onwards start at close to 300ms and get progressively worse. 3 71 ms 72 ms 78 ms 4 81 ms 83 ms 78 ms 5 83 ms 82 ms 79 ms 6 100 ms 85 ms 79 ms te0-0-2-1.ccr11.alb02.atlas.cogentco.com [38.104 .52.41] 7 91 ms 82 ms 90 ms te0-6-0-7.ccr21.alb02.atlas.cogentco.com [66.28. 4.21] 8 99 ms 97 ms 92 ms be2437.ccr22.yyz02.atlas.cogentco.com [66.28.4.1 98] 9 112 ms 113 ms 108 ms be2080.ccr42.ord01.atlas.cogentco.com [154.54.42 .5] 10 112 ms 110 ms 112 ms te0-6-1-0.ccr22.ord03.atlas.cogentco.com [154.54 .6.102] 11 116 ms 107 ms 115 ms te3-1.mag01.ord03.atlas.cogentco.com [154.54.40. 182] 12 115 ms 112 ms 115 ms te0-0-2-0.rcr11.b002281-5.ord03.atlas.cogentco.c om [154.54.25.2] 13 115 ms 115 ms 115 ms 38.88.42.54 14 113 ms 112 ms 117 ms lw-eqx-border2.rtr.liquidweb.com [209.59.157.68] 15 125 ms 120 ms 117 ms lw-dc2-core6-te9-2.rtr.liquidweb.com [209.59.157 .226] 16 125 ms 133 ms 145 ms lw-dc3-dist15.rtr.liquidweb.com [69.167.128.205] 17 121 ms 122 ms 120 ms www.dslreports.com [64.91.255.98]

So my ONT loses Data Sync (ability to access the internet) and since I have to go outside to look in the ONT I know it's raining every time. I've had a bunch of truck rolls, and I'm on my 3rd ONT. Is this happening to anyone else downline from Nashua on FAST or just me?

i receive a talktalk hg533 modem from uk, am in jamaica and trying to make it connect wit my adsl and it wont let mi ANYONE KNOW TO?

I was on a service call and was speaking with a FP line tech who I know somewhat well. He told me that FP is going to be rolling out bonded ADSL2+ service soon. Not sure what soon means. He saw paperwork at the office describing the service and probably also how to install it. I believe it will only be offered in towns where the CO is equipped with an Adtran TA5000 DSLAM. (same equipment used for their Ethernet over Copper service, if I am not mistaken) How one would figure out if they are served from a TA5000-equipped CO without asking a local tech, not sure.

I originally had Verizon FIOS and landline. When Fairpoint took over several years ago, they changed the name to "FAST Internet" on the bill. I want to move my landline to Vonage or BasicTalk because the phone is much cheaper, but I run my business at home, and depend on Internet access and associated Fairpoint email. Somewhere I read of people unbundling their phone from Internet and when the transfer order happens, they also lose their Internet. So I want to avoid that from happening. I emailed Vonage, and they said to check if my Fairpoint Internet uses dry loop connection without home phone service. Is there a way to find this out without contacting Fairpoint, because I imagine when I tell them I'm moving my phone, they'll just be a big pain in the ass and not helpful?

Hey there I am using my back up 7500 because the other one just fried on me and this one is having trouble allowing wireless connections to connect and obtain an ip address. For some reason when ever they connect they auto disconnect and get an error unable to obtain ip. Here is my connectivity log for the router. All Event Log Time Severity Process Details Jul 3 19:16:48 daemon.err wlan_app[349]: wl0: ioctl call failed,cmd=263 errno = 122,buf=mssid Jul 3 19:16:38 daemon.err wlan_app[349]: wl0: ioctl call failed,cmd=263 errno = 122,buf=mssid Jul 3 19:16:15 daemon.err wlan_app[349]: wl0: ioctl call failed,cmd=263 errno = 122,buf=mssid Jul 3 18:54:11 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:54:11 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,4 VALUE CHANGE Jul 3 18:54:11 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:54:11 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:54:11 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:49:54 user.warn kernel: AdslCoreEcUpdTmr: timeMs=1800145 ecUpdMask=0x40000 Jul 3 18:48:00 daemon.err wlan_app[349]: wl0: ioctl call failed,cmd=263 errno = 122,buf=mssid Jul 3 18:36:27 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:36:27 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,4 VALUE CHANGE Jul 3 18:36:27 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:36:27 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:36:27 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:30:38 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:30:38 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,4 VALUE CHANGE Jul 3 18:30:38 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:30:38 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:30:38 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:27:23 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:27:23 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,4 VALUE CHANGE Jul 3 18:27:23 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:27:23 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:27:23 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:25:17 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:25:17 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,4 VALUE CHANGE Jul 3 18:25:17 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:25:17 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:25:17 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:24:22 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:24:22 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,4 VALUE CHANGE Jul 3 18:24:22 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:24:22 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:24:22 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:23:55 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:23:55 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,4 VALUE CHANGE Jul 3 18:23:55 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:23:55 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:23:55 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:23:40 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:23:40 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,4 VALUE CHANGE Jul 3 18:23:40 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:23:40 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:23:40 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:23:27 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:23:27 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,4 VALUE CHANGE Jul 3 18:23:27 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:23:27 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:23:27 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:23:25 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 204 Jul 3 18:23:21 daemon.info cwmpd[320]: CWMP: Inform (200). The following events are true:0 BOOTSTRAP,1 BOOT,2 PERIODIC,4 VALUE CHANGE Jul 3 18:23:21 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:23:21 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:22:45 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:22:45 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,1 BOOT,2 PERIODIC,4 VALUE CHANGE Jul 3 18:22:45 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:22:45 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:22:45 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:22:29 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:22:29 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,1 BOOT,2 PERIODIC,4 VALUE CHANGE Jul 3 18:22:29 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:22:29 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:22:29 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jul 3 18:22:19 daemon.info cwmpd[320]: CWMP: Final Http Return Code = 503 Jul 3 18:22:19 daemon.info cwmpd[320]: CWMP: Inform (503). The following events are true:0 BOOTSTRAP,1 BOOT,2 PERIODIC,4 VALUE CHANGE Jul 3 18:22:19 daemon.info cwmpd[320]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = None Jul 3 18:22:19 daemon.err cwmpd[320]: cwmpDoInform: Received HTTP Error from ACS Jul 3 18:22:19 daemon.info cwmpd[320]: CWMP: Inform Sent Successfully Jan 1 00:02:22 daemon.notice net_mgr[374]: RIPConfig: no interfaces are enabled Jan 1 00:02:21 daemon.info dnsmasq[314]: using nameserver 64.222.212.243#53 Jan 1 00:02:21 daemon.info dnsmasq[314]: using nameserver 64.222.84.243#53 Jan 1 00:02:21 daemon.notice net_mgr[374]: Routes transitioning to Up state on ppp0. Jan 1 00:02:21 daemon.info dnsmasq[314]: reading /var/etc/resolv.conf Jan 1 00:02:19 daemon.notice net_mgr[374]: WAN came up before SIPALG was configured Jan 1 00:02:19 daemon.notice ip-up[3234]: ppp0: nameserver:64.222.84.243 Jan 1 00:02:19 daemon.notice ip-up[3234]: ppp0: nameserver:64.222.212.243 Jan 1 00:02:18 daemon.notice ip-up[3234]: ppp0: default route:ppp0/10.10.10.10 Jan 1 00:02:18 daemon.notice net_mgr[374]: QoS on ppp0 transitioning to Up state. Jan 1 00:02:18 daemon.notice ip-up[3234]: ppp0: connected:local=64.222.225.185,remote=10.10.10.10 Jan 1 00:02:17 daemon.notice pppd[3218]: Westell PPP Environment:device:nas1 ifname:ppp0 linkname:config0 iplocal:64.222.225.185 ipremote:10.10.10.10 ppplogname:root orig_uid:0 usepeerdns:1 dns1:64.222.212.243 dns2:64.222.84.243 Jan 1 00:02:17 daemon.warn pppd[3218]: pppd[3218] caused InternetUp light to be lit Jan 1 00:02:17 daemon.notice pppd[3218]: Westell ip_up() Jan 1 00:02:17 daemon.notice pppd[3218]: Westell PPP Environment:device:nas1 ifname:ppp0 linkname:config0 iplocal:64.222.225.185 ipremote:10.10.10.10 ppplogname:root orig_uid:0 usepeerdns:1 dns1:64.222.212.243 dns2:64.222.84.243 Jan 1 00:02:17 daemon.warn pppd[3218]: pppd[3218] caused InternetUp light to be lit Jan 1 00:02:17 daemon.notice pppd[3218]: PPPD Exit Status changed EXIT_NEGOTIATION_FAILED->EXIT_OK during phase PHASE_NETWORK->PHASE_RUNNING Jan 1 00:02:17 daemon.notice pppd[3218]: Westell phase_hook PHASE=PHASE_RUNNING(8) Jan 1 00:02:17 daemon.notice pppd[3218]: secondary DNS address 64.222.84.243 Jan 1 00:02:17 daemon.notice pppd[3218]: primary DNS address 64.222.212.243 Jan 1 00:02:17 daemon.notice pppd[3218]: remote IP address 10.10.10.10 Jan 1 00:02:17 daemon.notice pppd[3218]: local IP address 64.222.225.185 Jan 1 00:02:17 daemon.err pppd[3218]: Cannot determine ethernet address for proxy ARP Jan 1 00:02:17 daemon.notice pppd[3218]: Westell PPP Environment:device:nas1 ifname:ppp0 linkname:config0 ppplogname:root orig_uid:0 Jan 1 00:02:17 daemon.notice pppd[3218]: Westell phase_hook PHASE=PHASE_NETWORK(7) Jan 1 00:02:17 daemon.notice pppd[3218]: peer from calling number 02:00:00:01:00:21 authorized Jan 1 00:02:17 daemon.notice pppd[3218]: PAP authentication succeeded Jan 1 00:02:16 daemon.notice pppd[3218]: Westell PPP Environment:device:nas1 ifname:ppp0 linkname:config0 ppplogname:root orig_uid:0 Jan 1 00:02:16 daemon.notice pppd[3218]: Westell phase_hook PHASE=PHASE_AUTHENTICATE(5) Jan 1 00:02:13 daemon.notice pppd[3218]: Westell PPP Environment:device:nas1 ifname:ppp0 linkname:config0 ppplogname:root orig_uid:0 Jan 1 00:02:13 daemon.notice pppd[3218]: PPPD Exit Status changed EXIT_OK->EXIT_NEGOTIATION_FAILED during phase PHASE_SERIALCONN->PHASE_ESTABLISH Jan 1 00:02:13 daemon.notice pppd[3218]: Westell phase_hook PHASE=PHASE_ESTABLISH(4) Jan 1 00:02:13 daemon.warn pppd[3218]: Couldn t increase MRU to 1500 Jan 1 00:02:13 daemon.warn pppd[3218]: Couldn t increase MTU to 1500 Jan 1 00:02:13 daemon.notice pppd[3218]: Connect: ppp0 nas1 Jan 1 00:02:13 daemon.info pppd[3218]: Using interface ppp0 Jan 1 00:02:13 daemon.warn pppd[3218]: Creating PPPoE session file:/WFIO/ppp-config0:135 53057 nas1 02:00:00:01:00:21 Jan 1 00:02:13 daemon.info pppd[3218]: PPP session is 53057 Jan 1 00:02:13 daemon.err pppoe-relay[2554]: PADS packet from 02:00:00:01:00:21 on interface nas1 does not have Relay-Session-Id tag Jan 1 00:02:13 daemon.err pppoe-relay[2554]: PADO packet from 02:00:00:01:00:21 on interface nas1 does not have Relay-Session-Id tag Jan 1 00:02:13 daemon.notice pppd[3218]: Westell PPP Environment:device:nas1 linkname:config0 ppplogname:root orig_uid:0 Jan 1 00:02:13 daemon.notice pppd[3218]: PPPD Exit Status changed EXIT_USER_REQUEST->EXIT_OK during phase PHASE_DORMANT->PHASE_SERIALCONN Jan 1 00:02:13 daemon.notice pppd[3218]: Westell phase_hook PHASE=PHASE_SERIALCONN(2) Jan 1 00:02:13 daemon.notice pppd[3218]: Wan link is up and PPPoE Terminator on DSL:nas1 is done working Jan 1 00:02:13 daemon.notice pppd[3218]: Westell PPP Environment:device:nas1 linkname:config0 ppplogname:root orig_uid:0 Jan 1 00:02:13 daemon.notice pppd[3218]: PPPD Exit Status changed EXIT_OK->EXIT_USER_REQUEST during phase PHASE_HOLDOFF->PHASE_DORMANT Jan 1 00:02:13 daemon.notice pppd[3218]: Westell phase_hook PHASE=PHASE_DORMANT(3) Jan 1 00:02:13 daemon.notice pppd[3218]: Westell PPP Environment:device:nas1 linkname:config0 ppplogname:root orig_uid:0 Jan 1 00:02:13 daemon.notice pppd[3218]: Westell phase_hook PHASE=PHASE_HOLDOFF(11) Jan 1 00:02:13 daemon.notice pppd[3218]: Westell Random Holdoff returning 427 seconds Jan 1 00:02:13 daemon.warn pppd[3218]: Leaving destroy_pppoesessionfile Jan 1 00:02:13 daemon.err pppd[3218]: Unlinking PPPoE session file:/WFIO/ppp-config0 Jan 1 00:02:13 daemon.warn pppd[3218]: Enter destroy_pppoesessionfile Jan 1 00:02:13 daemon.err pppd[3218]: Unable to complete PPPoE Discovery Jan 1 00:02:13 daemon.err pppd[3218]: Terminating PPPoE discovery PADI due to signal Jan 1 00:02:13 daemon.notice pppd[3218]: Westell PPP Environment:device:nas1 linkname:config0 ppplogname:root orig_uid:0 Jan 1 00:02:13 daemon.notice pppd[3218]: Westell phase_hook PHASE=PHASE_SERIALCONN(2) Jan 1 00:02:13 daemon.notice /bin/pppoeterm[3225]: PADT success for Session -12982. Jan 1 00:02:13 daemon.notice /bin/pppoeterm[3225]: PPPLCPTERM success for Session -12982. Jan 1 00:02:13 daemon.err /bin/pppoeterm[3225]: Failed to discover destination PPPoE server Jan 1 00:02:05 user.err syslog: Unexpected message received on UDP port 137 (opcode=0,resp=0,len=50) Jan 1 00:02:04 daemon.notice /bin/pppoeterm[3223]: PADT success for Session -12704. Jan 1 00:02:04 daemon.notice /bin/pppoeterm[3223]: PPPLCPTERM success for Session -12704. Jan 1 00:02:04 daemon.err /bin/pppoeterm[3223]: Failed to discover destination PPPoE server Jan 1 00:01:55 daemon.notice /bin/pppoeterm[3221]: PADT success for Session -12764. Jan 1 00:01:55 daemon.notice /bin/pppoeterm[3221]: PPPLCPTERM success for Session -12764. Jan 1 00:01:55 daemon.err /bin/pppoeterm[3221]: Failed to discover destination PPPoE server Jan 1 00:01:46 user.notice root: ppp0 started on nas1 Jan 1 00:01:46 daemon.notice pppd[3218]: Westell PPP Environment:device:nas1 ppplogname:root orig_uid:0 Jan 1 00:01:46 daemon.notice pppd[3218]: pppd 2.4.2 started by root,uid 0 Jan 1 00:01:46 daemon.notice pppd[3217]: Westell PPP Environment:orig_uid:0 Jan 1 00:01:46 daemon.info pppd[3217]: Plugin holdoffrandom.so loaded. Jan 1 00:01:46 daemon.info pppd[3217]: Plugin ppphooker.so loaded. Jan 1 00:01:46 daemon.info pppd[3217]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 Jan 1 00:01:46 daemon.info pppd[3217]: Plugin rp-pppoe33.so loaded. Jan 1 00:01:45 daemon.notice net_mgr[343]: FirewallConfig_update: Done configuring firewall Jan 1 00:01:32 user.info kernel: device br0 entered promiscuous mode Jan 1 00:01:32 daemon.notice net_mgr[343]: FirewallConfig_update: setting firewall to None Jan 1 00:01:32 daemon.info pppoe-relay[2554]: Set promiscuous mode on br0 with type 0x8863 Jan 1 00:01:32 daemon.info pvc2684d: Communicating over ATM 0.0.35,encapsulation:LLC Jan 1 00:01:32 daemon.info pvc2684d: Interface nas1 created sucessfully Jan 1 00:01:32 daemon.err net_mgr[343]: NET_MGR: WanConfig:Ignoring WanConfig.0.atmpcr for ubr Jan 1 00:01:32 daemon.notice net_mgr[343]: WanConfig: DSL upstream PCR 2148 Jan 1 00:01:32 daemon.notice net_mgr[343]: WanConfig: Plumbing activeWAN:nas1:PPPoE Jan 1 00:01:31 user.notice root: ppp3 stopped on nas1 Jan 1 00:01:31 user.notice root: ppp2 stopped on nas1 Jan 1 00:01:31 user.notice root: ppp1 stopped on nas1 Jan 1 00:01:31 user.notice root: ppp0 stopped on nas1 Jan 1 00:01:31 daemon.notice net_mgr[343]: FirewallConfig_update: Done configuring firewall Jan 1 00:01:18 daemon.notice net_mgr[343]: FirewallConfig_update: setting firewall to None Jan 1 00:01:18 daemon.info pvc2684d: Communicating over ATM 0.0.35,encapsulation:LLC Jan 1 00:01:18 daemon.info pvc2684d: Interface nas1 created sucessfully Jan 1 00:01:17 daemon.err net_mgr[343]: WanConfig: activeWAN has an unknown protocol WACP. Jan 1 00:01:17 daemon.err net_mgr[343]: NET_MGR: WanConfig:Ignoring WanConfig.0.atmpcr for ubr Jan 1 00:01:17 daemon.notice net_mgr[343]: WanConfig: DSL upstream PCR 2148 Jan 1 00:01:17 daemon.notice net_mgr[343]: WanConfig: Plumbing activeWAN:nas1:WACP Jan 1 00:01:17 user.info kernel: device br0 left promiscuous mode Jan 1 00:01:17 user.notice root: ppp3 stopped on nas1 Jan 1 00:01:17 user.notice root: ppp2 stopped on nas1 Jan 1 00:01:17 user.notice root: ppp1 stopped on nas1 Jan 1 00:01:17 user.notice root: ppp0 stopped on nas1 Jan 1 00:01:16 daemon.warn pppd[1758]: Leaving destroy_pppoesessionfile Jan 1 00:01:16 daemon.err pppd[1758]: Unlinking PPPoE session file:/WFIO/ppp-config0 Jan 1 00:01:16 daemon.warn pppd[1758]: Enter destroy_pppoesessionfile Jan 1 00:01:16 daemon.notice pppd[1758]: Westell PPP Environment:device:nas1 linkname:config0 ppplogname:root orig_uid:0 Jan 1 00:01:16 daemon.notice pppd[1758]: PPPD Exit Status changed EXIT_OK->EXIT_USER_REQUEST during phase PHASE_HOLDOFF->PHASE_DORMANT Jan 1 00:01:16 daemon.notice pppd[1758]: Westell phase_hook PHASE=PHASE_DORMANT(3) Jan 1 00:01:16 daemon.notice pppd[1758]: Westell PPP Environment:device:nas1 linkname:config0 ppplogname:root orig_uid:0 Jan 1 00:01:16 daemon.notice pppd[1758]: Westell phase_hook PHASE=PHASE_HOLDOFF(11) Jan 1 00:01:16 daemon.notice pppd[1758]: Westell Random Holdoff returning 335 seconds Jan 1 00:01:16 daemon.warn pppd[1758]: Leaving destroy_pppoesessionfile Jan 1 00:01:16 daemon.err pppd[1758]: Unlinking PPPoE session file:/WFIO/ppp-config0 Jan 1 00:01:16 daemon.warn pppd[1758]: Enter destroy_pppoesessionfile Jan 1 00:01:16 daemon.err pppd[1758]: Unable to complete PPPoE Discovery Jan 1 00:01:16 daemon.err pppd[1758]: Terminating PPPoE discovery PADI due to signal Jan 1 00:01:16 daemon.notice pppd[1758]: Westell PPP Environment:device:nas1 linkname:config0 ppplogname:root orig_uid:0 Jan 1 00:01:16 daemon.notice pppd[1758]: Westell phase_hook PHASE=PHASE_SERIALCONN(2) Jan 1 00:01:15 daemon.notice pppd[1758]: Westell PPP Environment:device:nas1 ppplogname:root orig_uid:0 Jan 1 00:01:15 daemon.notice pppd[1758]: pppd 2.4.2 started by root,uid 0 Jan 1 00:01:15 user.notice root: ppp0 started on nas1 Jan 1 00:01:14 daemon.notice pppd[1757]: Westell PPP Environment:orig_uid:0 Jan 1 00:01:14 daemon.info pppd[1757]: Plugin holdoffrandom.so loaded. Jan 1 00:01:14 daemon.info pppd[1757]: Plugin ppphooker.so loaded. Jan 1 00:01:14 daemon.info pppd[1757]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 Jan 1 00:01:14 daemon.info pppd[1757]: Plugin rp-pppoe33.so loaded. Jan 1 00:01:14 daemon.notice net_mgr[343]: FirewallConfig_update: Done configuring firewall Jan 1 00:01:04 user.crit kernel: ADSL link up,interleaved,us=911,ds=3548 Jan 1 00:01:04 user.crit kernel: ADSL G.992 message exchange Jan 1 00:01:03 user.info syslog: upnp_ssdp_multicastListener: SSDP Multicast Listener started Jan 1 00:01:03 user.info syslog: upnp_ssdp_initLib UPNP Server IP Address = 192.168.1.1 Jan 1 00:01:03 user.info syslog: upnp_ssdp_initLib: Initializing SSDP Library Jan 1 00:01:03 user.info syslog: UPNP Enumerated 4 Devices,17 Services,30 Actions,21 Variables Jan 1 00:01:03 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_Layer3Forwarding.xml opened,Size 153 Jan 1 00:01:03 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_DeviceInfo.xml opened,Size 176 Jan 1 00:01:02 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_DeviceConfig.xml opened,Size 176 Jan 1 00:01:02 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_LANConfigSecurity.xml opened,Size 153 Jan 1 00:01:02 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_ManagementServer.xml opened,Size 153 Jan 1 00:01:02 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_Time.xml opened,Size 153 Jan 1 00:01:01 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_WANCommonInterfaceConfig.xml opened,Size 153 Jan 1 00:01:01 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_WANDSLInterfaceConfig.xml opened,Size 153 Jan 1 00:01:01 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_WANEthernetInterfaceConfig.xml opened,Size 153 Jan 1 00:01:01 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_WANDSLConnectionManagement.xml opened,Size 153 Jan 1 00:01:01 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_WANDSLDiagnostics.xml opened,Size 153 Jan 1 00:01:00 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_WANDSLLinkConfig.xml opened,Size 153 Jan 1 00:01:00 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_WANEthernetLinkConfig.xml opened,Size 153 Jan 1 00:01:00 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_WANIPConnection.xml opened,Size 153 Jan 1 00:01:00 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_WANPPPConnection.xml opened,Size 153 Jan 1 00:01:00 user.crit kernel: ADSL G.992 channel analysis Jan 1 00:00:59 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_LANHostConfigManagement.xml opened,Size 18200 Jan 1 00:00:59 daemon.notice net_mgr[343]: FirewallConfig_update: setting firewall to None Jan 1 00:00:59 user.info syslog: upnp_getXmlFile File /web/upnp/UPNP_LANEthernetInterfaceConfig.xml opened,Size 153 Jan 1 00:00:59 user.info syslog: upnp_buildDeviceLists xmlDeviceDescription is Not NULL Jan 1 00:00:59 user.info kernel: device br0 entered promiscuous mode Jan 1 00:00:59 daemon.info pppoe-relay[1095]: Set promiscuous mode on br0 with type 0x8863 Jan 1 00:00:59 daemon.info pvc2684d: Communicating over ATM 0.0.35,encapsulation:LLC Jan 1 00:00:59 user.warn kernel: KLOB extended to 8 pools Jan 1 00:00:59 daemon.info pvc2684d: Interface nas1 created sucessfully Jan 1 00:00:58 daemon.err net_mgr[343]: NET_MGR: WanConfig:Ignoring WanConfig.0.atmpcr for ubr Jan 1 00:00:58 daemon.notice net_mgr[343]: WanConfig: DSL upstream PCR 2000 Jan 1 00:00:58 daemon.notice net_mgr[343]: WanConfig: Plumbing activeWAN:nas1:PPPoE Jan 1 00:00:58 user.crit kernel: ADSL G.992 started Jan 1 00:00:49 daemon.notice net_mgr[343]: SIPALGConfig: disabled Jan 1 00:00:48 daemon.notice net_mgr[343]: All Routes transitioning to Up state. Jan 1 00:00:48 daemon.notice net_mgr[343]: All Routes transitioning to Down state. Jan 1 00:00:48 daemon.notice net_mgr[343]: RIPConfig: no interfaces are enabled Jan 1 00:00:48 user.warn kernel: ip_nat_pptp version 2.0 loaded Jan 1 00:00:47 user.warn kernel: ip_conntrack_pptp version 2.1 loaded Jan 1 00:00:47 daemon.info dnsmasq[314]: using nameserver 10.2.2.2#53 Jan 1 00:00:47 daemon.info dnsmasq[314]: reading /var/etc/resolv.conf Jan 1 00:00:47 user.crit kernel: ADSL G.994 training Jan 1 00:00:46 user.crit kernel: ADSL link down Jan 1 00:00:45 user.crit kernel: ADSL G.992 message exchange Jan 1 00:00:44 user.info kernel: br0: port 2(usb0) entering forwarding state Jan 1 00:00:44 user.info kernel: br0: topology change detected,propagating Jan 1 00:00:44 user.info kernel: br0: port 1(eth1) entering forwarding state Jan 1 00:00:44 user.info kernel: br0: topology change detected,propagating Jan 1 00:00:44 user.crit kernel: eth1 Link UP. Jan 1 00:00:41 user.crit kernel: ADSL G.992 channel analysis Jan 1 00:00:40 user.info kernel: br0: port 2(usb0) entering learning state Jan 1 00:00:40 user.warn kernel: ftmModeFlag: 0 Jan 1 00:00:40 user.info kernel: device usb0 entered promiscuous mode Jan 1 00:00:40 user.info kernel: br0: port 1(eth1) entering learning state Jan 1 00:00:40 user.warn kernel: ftmModeFlag: 0 Jan 1 00:00:40 user.info kernel: device eth1 entered promiscuous mode Jan 1 00:00:40 syslog.info syslogd started: BusyBox v1.1.3